home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
HAM_RAD
/
3176.ZIP
/
ICOM1.ZIP
/
IC2AT.1
< prev
next >
Wrap
Text File
|
1990-09-12
|
991b
|
29 lines
IC2AT.1
icom 02at mod 140-163 mhz
a. locate a copy of the june 1986 issue of 73 mag.
a. locate a copy of the june 1986 issue of 73 mag.
b. the article on pg. 60 is for models with id numbers
lower than 35,000. if yours is one of the newer
models like mine..... then follow these changes:
1. read the entire article b-4 doing anything!!!
2. follow steps 1 to 3 on pg. 61 "modify ur 02at"
then s t o p ! refer to fig.2 on pg. 60 and remember
the diodes on urs are in different locations than in
the pix.
3. using a very small flat blade iron and some solder wick
remove the the three leg diode d2 notice that the
numbering for d1,d2,d3,d4 are off to the left of the
actual location of the diodes on the board.
4. resolder d2 down in position d5 try to use the solder
on the pads.. only add solder to the pads if absolutely
necessary, b-4 you put the diode in place to avoid
bridging.
CONTINUED IN FILE IC2AT.2